Back at the boat. The starboard side fit right in. I left it 4" longer to attach a line and pull the board in with the winch. The aft most pin is in, and the board is bending around the bathroom bulkhead or wall. For the pins, I'm using 3/8" stainless steel threaded rod that runs through the cabin side board from top to bottom and then through the deck where washers and nuts fasten the side board to the deck. The original pins wee stainless steel carriage bolts. The pins are spaced every 18 inches, and there are also #12 x 2" bronze wood screws every 4".
No comments:
Post a Comment